Chockfast epoxy resin

CHOCKFAST EPOXY RESIN

Over more than 50 years EMHA  is the Chockfast epoxy resin  distributor en specialist for application and engineered Chockfast epoxy solutions. The reliable Chockfast epoxy system are used to install more than 45.000 main propulsion engines plus auxiliaries.

With Chockfast epoxy resin, reliability is guaranteed on all types of high preciously rotating equipment and installations for shipbuilding and offshore industry.

CHOCKFAST ORANGE (PR-610TCF) – Premier Structural Chocking compound
High critical equipment – Propulsion installations, bearings, deck equipment, auxiliary equipment, constructions.
Pourable and injectable 100% solids, two component inert filled epoxy.
Filling thickness from 5 to 100 mm.
Compressive strength 1336 kg/cm²

CHOCKFAST GRAY (PR-610FR) Structural Chocking compound
Non critical equipment – deck equipment, auxiliary equipment, constructions.
Pourable, 100% solids, two component inert filled epoxy.
Filling thickness from 12 to 50 mm.
Compressive strength 1125 kg/cm

CHOCKFAST BLACK – High temperature Structural Chocking compound
High critical equipment – Propulsion installations, bearings, deck equipment, auxiliary equipment,, constructions.
Pourable, 100% solids, two component inert filled epoxy.
Filling thickness from 30 to 65 mm.
Compressive strength 1216 kg/cm²
Maximum operating temperature is 94 ̊C

PHILLYBOND ORANGE (Flexible epoxy sealant)
Trowelable and injectable, 100% solids, two component inert filled epoxy.
Filling thickness from 0.5 to 80 mm.
Adhesive strength 40 kg/cm²
Lap shear strength 30 kg/cm²

PHILLYMASTIC TG-7B (LNG/LPG tank load bearing system)
Trowelable and pourable 100% solids, two component inert filled epoxy.
Filling thickness from 2 to 150 mm.
Compressive strength 717 kg/cm²

PHILLYCLAD 1775/620TS (Propeller shaft glass reinforced epoxy coating system)
Liquid – 100% solids, two component inert filled epoxy mastic
Flexural modulus 8050 kg/cm²
Flexural strength 366 kg/cm²

REPAIR COMPOUND (filling, smoothing and fairing epoxy)
Trowelable paste, 100% solids, two component inert filled epoxy.
Filling thickness from 1 to 30 mm.
Compressive strength 623 kg/cm²

PHILLYBOND TA-30 – High tack epoxy adhesive
Trowelable paste, 100% solids, two component inert filled epoxy.
Filling thickness from 0.8 to 5 mm.
Compressive strength 770 kg/cm²
Compressive modules of elasticity 13.790 kg/cm²

SOCKETLOCK – Wire rope socketing system
Pourable liquid resin, for heavy lift and offshore mooring products
Viscosity 7000 – 12000 centipoise
Compressive strength 1400 kg/cm²